Vespa

PERKENALANKU yang pertama dengan Vespa adalah di tahun 80 ketika di Semarang. Mas Mur suami mbak Wiwik memiliki sebuah sepeda motor skuter Vespa. Mas Yanto sering mengajakku berkeliling kota dan mengajariku menggunakannya. Ketika aku sudah bisa menggunakannya sendiri akupun sering berjalan-jalan di sore hari. Tempat JJS favoritku adalah daerah Candi yang terletak di Semarang atas. Bervespa ria di tempat itu benar-benar menyegarkan jiwa.Ketika di Bandung, akupun bertemu kembali dengan vespa milik Isworo. Aku sering sekali dibonceng dari Bandung ke Cimahi atau sebaliknya.










Menjelang akhir aku di St. Angela kesempatan untuk memiliki vespa sendiri. Ketika itu aku memperoleh vespa melalui sebuah iklan di koran. Vespa super tahun 78 dengan surat-surat lengkap seharga Rp 750 ribu. Uangnya kudapat dari pinjaman di CU Tunas Merdeka. Ketika itu aku masih tinggal di Babakan Tarogong. Perjalanan terjauhku dengan vespa itu adalah ke Banjaran.

Selama di Rancaekek, vespa itulah yang menjadi alat transportasi utamaku untuk bergerak ke pelbagai titik penting seperti pasar, stasiun kereta api, puskesmas, sekolah anakku dan kantor partai. Di sore hari aku biasa mengajak anak-anakku berkeliling komplek perumahan dengan vespa itu. Ketika itu Bumi Rancaekek Kencana adalah tempat yang nyaman dan indah. Kami berkeliling dari satu blok ke blok yang lain, bahkan seusai hujan turun pun kami menikmati jalan-jalan.

Selain untuk digunakan sebagai sarana transportasi, vespa itupun pernah juga menjadi sarana ekonomi sebagai barang yang digadaikan di pegadaian. Biasanya kugadaikan di perum pegadaian Ciparay.













Pada masa reformasi, vespaku menjadi sahabat setia untuk berjuang. Ketika itu aku harus memiliki mobilitas yang tinggi untuk mengorganisir para pengurus dan anggota partai, dengan vespa itulah aku ke secretariat, mengunjungi teman-teman seperjuangan dan para simpatisan. Ketika itu kehidupan pada pengurus partai begitu terpuruknya sehingga mereka harus menggunakan angkutan umum atau bahkan berjalan kaki menembus hujan berpayung daun pisang. Alhamdulillah aku masih bisa bergerak lebih cepat karena vespa itu.

Seingatku vespa itu baru dua kali ngadat ketika kuajak berjuang. Pertama ia mogok di rumah pak Sujana Sobari di Rancakusumba. Di belakang rumah pak Sujana ada gudang tempat mengumpulkan hasil panen sekaligus kandang ayam. Di situlah secretariat partai kami. Megawati pun pernah menggelorakan perjuangan di tempat itu. Suatu saat hujan deras turun, Vespaku kehujanan sehingga tak bisa kugunakan saat pulang. Kedua ia pernah mogok di tengah jalan Majalaya saat hujan turun. Aku bersama pak Tri ketika itu minta tolong kang Mamat Dorim untuk mengangkut vespaku ke rumah dengan mobil bak terbuka.

Sayang sekali aku tak bisa mempertahankan keberadaan vespaku itu. Karena masalah keuangan, tahun 2000 vespa itu kujual seharga Rp 2 juta.

Berikut ini hal-ihwal mengenai Vespa.




















Vespa
From Wikipedia, the free encyclopedia

Type Subsidiary

Industry Scooter

Founded 23 April 1946 in Florence

Headquarters Pontedera, Italy

Parent
Piaggio & Co. SpA

Website vespa.com

Vespa is an Italian brand of scooter manufactured by Piaggio. The name means wasp in Italian.

The Vespa has evolved from a single model motor scooter manufactured in 1946 by Piaggio & Co. S.p.A. of Pontedera, Italy—to a full line of scooters and one of seven companies today owned by Piaggio—now Europe's largest manufacturer of two-wheeled vehicles and the world's fourth largest motorcycle manufacturer by unit sales.[1]
From their inception, Vespa scooters have been known for their painted, pressed steel unibody which combines a complete cowling for the engine (enclosing the engine mechanism and concealing dirt or grease), a flat floorboard (providing foot protection), and a prominent front fairing (providing wind protection) into a structural unit.

History

Post World War II Italy, in light of its agreement to cessation of war activities with the Allies, had its aircraft industry severely restricted in both capability and capacity.

Piaggio emerged from the conflict with its Pontedera fighter plane plant demolished by bombing. Italy's crippled economy and the disastrous state of the roads did not assist in the re-development of the automobile markets. Enrico Piaggio, the son of Piaggio's founder Rinaldo Piaggio, decided to leave the aeronautical field in order to address Italy's urgent need for a modern and affordable mode of transportation for the masses.

Concept

The inspiration for the design of the Vespa dates back to Pre-WWII Cushman scooters made in Nebraska, USA. These olive green scooters were in Italy in large numbers, ordered originally by Washington as field transport for the Paratroops and Marines. The US military had used them to get around Nazi defense tactics of destroying roads and bridges in the Dolomites (a section of the

Design

In 1944, Piaggio engineers Renzo Spolti and Vittorio Casini designed a motorcycle with bodywork fully enclosing the drivetrain and forming a tall splash guard at the front. In addition to the bodywork, the design included handlebar-mounted controls, forced air cooling, wheels of small diameter, and a tall central section that had to be straddled. Officially known as the MP5 ("Moto Piaggio no. 5"), the prototype was nicknamed "Paperino".[2]

Enrico Piaggio was displeased with the MP5, especially the tall central section. He contracted aeronautical engineer Corradino D'Ascanio, to redesign the scooter.[2] D'Ascanio, who had earlier been consulted by Ferdinando Innocenti about scooter design and manufacture, made it immediately known that he hated motorcycles, believing them to be bulky, dirty, and unreliable.[3]

D'Ascanio's MP6 prototype had its engine mounted beside the rear wheel. The wheel was driven directly from the transmission, eliminating the drive chain and the oil and dirt associated with it. The prototype had a unit spar frame with stress-bearing steel outer panels.[3] These changes allowed the MP6 to have a step-through design without a centre section like that of the MP5 Paperino. The MP6 design also included a single sided front suspension, interchangeable front and rear wheels mounted on stub axles, and a spare wheel. Other features of the MP6 were similar to those on the Paperino, including the handlebar-mounted controls and the enclosed bodywork with the tall front splash guard.[2]

Upon seeing the MP6 for the first time Enrico Piaggio exclaimed: "Sembra una vespa!" ("It resembles a wasp!") Piaggio effectively named his new scooter on the spot.[3][4] Vespa is both Latin and Italian for wasp—derived from the vehicle's body shape: the thicker rear part connected to the front part by a narrow waist, and the steering rod resembled antennae. The name also refers to the high-pitched noise of the two-stroke engine.[citation needed]

Product



modified by the French military, that incorporated an anti tank weapon















On 23 April 1946, at 12 o'clock in the central office for inventions, models and makes of the Ministry of Industry and Commerce in Florence, Piaggio e C. S.p.A. took out a patent for a "motorcycle of a rational complexity of organs and elements combined with a frame with mudguards and a casing covering the whole mechanical part".[5]

The basic patented design allowed a series of features to be deployed on the spar-frame which would later allow quick development of new models. The original Vespa featured a rear pillion seat for a passenger, or optionally a storage compartment. The original front protection "shield" was a flat piece of aero metal; later this developed in to a twin skin to allow additional storage behind the front shield, similar to the glove compartment in a car. The fuel cap was located underneath the (hinged) seat, which saved the cost of an additional lock on the fuel cap or need for additional metal work on the smooth skin.

The scooter had rigid rear suspension and small 8-inch (200 mm) wheels that allowed a compact design and plenty of room for the rider's legs. The Vespa's enclosed, horizontally-mounted two-stroke 98 cc engine acted directly on the rear drive wheel through a three-speed transmission. The twistgrip-controlled gear change involved a system of rods. The early engine had no cooling, but fan blades were soon attached to the flywheel (otherwise known as the magneto, which houses the points and generates electricity for the bike and for the engine's spark) to push air over the cylinder's cooling fins. The modern Vespa engine is still cooled this way. The mixture of two-stroke oil in the fuel produced high amounts of smoke, and the engine made a high buzzing sound like a wasp.[citation needed]

The MP6 prototype had large grilles on the front and rear of the rear fender covering the engine. This was done to allow air in to cool the engine, as the prototype did not have fan cooling. A cooling fan similar to that used on the MP5 "Paperino" prototype was included in the design of the production Vespa, and the grilles were removed from the fender.[2]

Launch

Piaggio filed a patent for the Vespa scooter design in April 1946. The application documents referred to a "model of a practical nature" for a "motorcycle with rationally placed parts and elements with a frame combining with mudguards and engine-cowling covering all working parts", of which "the whole constitutes a rational, comfortable motorcycle offering protection from mud and dust without jeopardizing requirements of appearance and elegance". The patent was approved the following December.

The first 13 examples appeared in spring 1946, and reveal their aeronautical background. In the first examples, one can recognize the typical aircraft technology. Attention to aerodynamics is evident in all the design, in particular on the tail. It was also one of the first vehicles to use monocoque construction (where the body is an integral part of the chassis).

The company was aiming to manufacture the new Vespa in large numbers, and their longstanding industrial experience led to an efficient Ford-style volume production line. The scooter was presented to the press at Rome Golf Club, where journalists were apparently mystified by the strange, pastel coloured, toy-like object on display. But the road tests were encouraging, and even with no rear suspension the machine was more manoeuvrable and comfortable to ride than a traditional motorcycle.
Following its public debut at the 1946 Milan Fair, the first fifty sold slowly—then with the introduction of payment by installments, sales took off.

Sales and development

Piaggio sold some 2,500 Vespas in 1947, over 10,000 in 1948, 20,000 in 1949, and over 60,000 in 1950.[6]

The biggest sales promo ever was Hollywood. In 1952, Audrey Hepburn side-saddled Gregory Peck's Vespa in the feature film Roman Holiday for a ride through Rome, resulting in over 100,000 sales. In 1956, John Wayne dismounted his horse in favor of the two-wheeler to originally get between takes on sets.[7] By the end of the fifties, Lucia Bosé and her husband, the matador Luis Miguel Dominguín,[8] as well as Marlon Brando, Dean Martin, and the entertainer Abbe Lane had become Vespa owners. William Wyler filmed Ben Hur in Rome in 1959, allowing Charlton Heston to abandon horse and chariot between takes to take a spin on the Vespa.[9][10]

Vespa clubs popped up throughout Europe, and by 1952, worldwide Vespa Club membership had surpassed 50,000. By the mid-1950s, Vespas were being manufactured under licence in Germany, the United Kingdom, France, Belgium and Spain; in the 1960s, production was started in India, Brazil and Indonesia. By 1956, one million had been sold, then two million by 1960. By the 1960s, the Vespa—originally conceived as a utility vehicle—had come to symbolize freedom and imagination, and resulted in further sales boosts: four million by 1970, and ten million by the late 1980s. Between 1957 and 1961 a reverse-engineered and partially redesigned version of the Vespa was made in USSR under the name Vjatka-VP150.[11]

Improvements were made to the original design and new models were introduced. The 1948 Vespa 125 had rear suspension and a bigger engine. The headlamp was moved up to the handlebars in 1953, and had more engine power and a restyled rear fairing. A cheaper spartan version was also available. One of the best-loved models was the Vespa 150 GS introduced in 1955 with a 150 cc engine, a long saddle, and the faired handlebar-headlamp unit. Then came the 50 cc of 1963, and in 1968 Vespa 125 Primavera became one of the most durable of all.

Vespas came in two sizes, referred to as "largeframe" and "smallframe". The smallframe scooters came in 50 cc, 90 cc, 100 cc, and 125 cc versions, all using an engine derived from the 50 cc model of 1963, and the largeframe scooters in 125 cc, 150 cc, 160 cc, 180 cc, and 200 cc displacements using engines derived from the redesigned 125 cc engine from the late 1950s.



Vespa sidecar








The largeframe Vespa evolved into the PX range in the late 1970s and was produced in 125 and 150 cc versions until July 2007. The smallframe evolved into the PK range in the early 1980s, although some vintage-styled smallframes were produced for the Japanese market as late as the mid 1990s.


1990s and beyond

The ET model range stuck true to the wasp/aero design principles. It was lighter, more aerodynamic, had an automatic gearbox and could take a series of engines from a 50 cc in either two-stroke or four-stroke, up to a 150 cc four stroke.[12]
When Vespa celebrated its 50th anniversary in 1996, more than 15 million of the scooters had been sold worldwide.[citation needed] Other companies vied with Piaggio for market share, but none came close to emulating the success—or romance—of Vespa.

Under new ownership

In 1959 Piaggio came under the control of the Agnelli family, the owners of car maker Fiat SpA. Vespa thrived until 1992 when Giovanni Alberto Agnelli became CEO, but Agnelli was already suffering from cancer and died in 1997. In 1999 Morgan Grenfell Private Equity acquired Piaggio, but a quickly hoped-for sale was dashed by a failed joint venture in China.

In 2003, the company found itself close to bankruptcy. Continual management changes and millions spent on many different plans and products had saddled Piaggio with crushing debt and left it vulnerable to competition from cheaper Asian rivals.
Then came Roberto Colaninno: A lot of people told me I was crazy. Piaggio wasn't dying. It just needed to be treated better. Piaggio's finances were in a bad shape, but its brand was still well-known and its products were featuring in more Hollywood films thanks to the Vespa ET4. In October 2003 Colaninno made an initial investment of 100 million euros through his holding company Immsi SpA in exchange for just under a third of Piaggio and the mandate to run it. Chief executive Rocco Sabelli redesigned the factory to Japanese principles so that every Piaggio scooter could be made on any assembly line.

Colaninno laid down some rules and made quick changes; all bonuses for blue-collar workers and management were based on the same criteria: profit margins and customer satisfaction. He didn't fire a single worker—a move which helped seduce the company's skeptical unions. Air conditioning was installed in the factory and he gave the company's engineers, who had been idled by the company's financial crisis, deadlines for projects. They rolled out two world firsts in 2004: a gas-electric hybrid scooter and a scooter with two wheels in front and one in back which grips the road better.

One of Piaggio's problems Mr. Colaninno couldn't fix from the inside was its scale. Even though Piaggio was the European market leader, it was dwarfed by rivals Honda and Yamaha. A year after rescuing Piaggio, Colaninno decided to salvage another Italian brand: scooter and motorcycle maker Aprilia. On July 11, 2006, shares of Piaggio & Co., became available to the general public through listing on the Milan [Italy] Stock Exchange or Borsa Italiana. Piaggio share prices, converted to US Dollars, may be found under the trading symbol: PIAGF.

Re-entry to North America

Piaggio first came back into the market in 2001 with the ET2 (two stroke 50 cc) and ET4 (four stroke 150 cc). In 2004, the PX (model year 2005) was re-introduced to North America to meet market demand for the classic Vespa design. Growth in the US market and worldwide environmental concerns meant a need for larger and cleaner engines, so Vespa developed the LEADER (Low Emissions ADvanced Engine Range) series of four-stroke engines. The larger Granturismo frame, with larger 12-inch (300 mm) wheels, was introduced to handle the additional power. The bike in 2006 spawned the iconic GTS-250ie version, with an upgraded suspension and the new QUASAR (QUArter-liter Smooth Augmented Range) 250 cc fuel-injected engine, capable of 80+ mph. As of the end of 2010 the GTS 250 has been replaced by the GTS 300 which has a 278cc fuel - injected engine. In 2005, the ET was withdrawn from Europe and North America and replaced by a new small-frame scooter, the LX range. These were available in the USA in 50 cc and 150 cc versions, while Europeans could choose a 50 cc or 125 cc.

Design icon

In recent years, many urban commuters have purchased new or restored Vespas. A shortage of available parking for automobiles in large urban areas and the Vespa's low running costs are two reasons for the increase in Vespa (and other scooter) popularity. The cultural use of the scooter as a recreational vehicle with a sub-cultural following in the USA/Canada and parts of Europe & Japan has also contributed to the rise in Vespa ownership. In contrast, the Vespa is considered a utilitarian vehicle for hauling products and sometimes up to 5 family members in much of Asia and Mexico

There is a Piaggio Museum & Gift Shop adjacent to the plant in central Pontedera, near Pisa, Tuscany. The permanent exhibition includes those items which toured venues such as the Guggenheim in New York and the Centre Pompidou in Paris. Also on display is a model personally customised by Salvador Dalí in 1962.
The 1959 Vespa N was also the styling inspiration for the Neco Italia.[13]

Global markets

Europe

Vespa's largest market by all measures globally is still Italy, but as a result of the mod subculture that developed in the 1960s, the United Kingdom is still Vespa's second largest global market—and at one point in the 1960s, its largest. The appeal of the Vespa to the style-conscious mods was the weather protection. Their counterparts, the rockers rode classic British motorcycles such as Triumph Bonneville and BSAs, and needed to wear leathers against the elements. Mods would modify their Vespas, adding lights, mascots, accessories, various racks and crash bars. A new lifestyle evolved in the UK, with thousands attending scooter rallies.
The dominance of the Vespa declined through the 1970s, as small car ownership increased and cheap and reliable commuter bikes like the Honda Super Cub hit sales. Despite the introduction of the more modern 'P' range in the 1970s, the lack of development cost Vespa, and like other markets, the sales fell off drastically in the economic boom of the 1980s. Then Vespa introduced the trendy automatic ET2, London introduced the congestion charge and—partly with celebrity chef Jamie Oliver's indirect help from his BBC2 series—sales suddenly leapt.[14]

North America

Much as Vespa had used the Cushman Army scooter as inspiration for its original design, Vespa in turn made scooters for Sears and Cushman after World War II.[15]
Imported by Morton Colby of Colby General Tire Company, 662 E. Fordham Road, Bronx, New York, the Sears models were 3- and 4-speed 125 cc Vespas rebadged as Sears Allstate Cruiseaires. Innocenti also distributed their Lambretta brand via Montgomery Ward's catalogue during this post-WWII period. These were the premier brands of scooters, bringing premium pricing to many, including farmers, whose link to the outside world was via purchases made in these catalogues. Cushman sold rebadged Vespa scooters as Cushmans, but many Cushman dealers refused to market a "foreign" machine. However, collectors prize the Cushman Vespa because it is relatively rare.

Bankruptcy of Vespa's American importer due to two expensive product-liability lawsuits, increased competition from Japanese manufacturers, and certain states' passing so-called "green laws" caused a withdrawal from the US market in late 1981.
During 1981-2001, despite an absence of United States domestic sales, Vespas continued to have a core group of enthusiasts who kept vintage scooters on the road by rebuilding, restoring, and adding performance-enhancing engine parts as the stock parts would wear out.

Vespa returned to the US market in 2001 with a new, more modern style ET series, in 50 cc two and four stroke, and 150 cc four-stroke. According to the Motorcycle Industry Council, U.S. scooter sales increased fivefold over six years, swelling from 12,000 units in 1997 to 69,000 units in 2002. Vespa sales in the U.S. increased 27 percent between 2001 and 2002. The 65 "Vespa Boutiques" scattered throughout the U.S. gave scooterists a place to buy, service, and customize Vespa scooters, and outfit themselves in everything from Vespa watches and helmets to Vespa jackets, T-shirts, and sunglasses. Vespa restarted its American sales effort, opening its first boutique on Ventura Boulevard in Sherman Oaks, Calif.

In light of vastly-increasing US sales, Vespa developed the GT, offered as a 200 cc four-stroke and a 125 cc variant in Europe. In 2004 Vespa reintroduced a modernized PX 150 to the US. In the fall of 2005, Piaggio offered their largest-selling Vespa scooter ever, the 250 cc-engined GTS250, available in Europe with ABS.
Rest of the world
Vespa acquired popularity beyond Europe and North America. When looking to expand into markets outside of Europe and North America, it was common for Vespa to partner with, or license certain models to already existing manufacturers. Though the motorcycle industry has been and still is dominated by Japanese companies, Vespa still has a small but significant markets. While details are sometimes hard to come by, especially in some markets, some information is known.

India

Piaggio first licensed the production of Vespa scooters in India to Bajaj Auto in the 1960s. In 1971, Piaggio's license was not renewed as a part of Indira Gandhi's privatization programs. After the collaboration ended, Bajaj continued to produce scooters of its own design, namely the Chetak, using design and engineering cues it had gleaned from the earlier affiliation.

Another Vespa partner in India was that of LML Motors. Beginning as a joint-venture with Piaggio in 1983, LML, in addition to being a large parts supplier for Piaggio, produced the P-Series scooters for the Indian market. In 1999, after protracted dispute with Piaggio, LML bought back Piaggio's stake in the company and the partnership ceased. LML continues to produce (and also exports) the P-Series variant known as the Stella in the U.S. market and by other names in different markets.
Piaggio, in 2007, announced plans to reenter the Indian market. This time, however, Piaggio plans to do so with a wholly owned subsidiary.

Taiwan

Vespa has had various partnerships and presence in Taiwan. In 1965 Taiwan Vespa Co. Ltd was licensed for Vespa scooter production. From 1972 to 1982 Vespa entered into a collaboration with manufacturer PGO. In 1978 Vespa entered into a collaboration with TGB, which to some extent, continues to this day (namely with CVT transmission production).

Indonesia

A company known as Dan Motors Vespa produced Vespas under license for the Indonesian market.

Export of restored classics

The resurgence in interest in vintage motor scooters has also spawned the scooter restoration industry, with many restored Vespas being exported from Thailand, Vietnam and Indonesia to the rest of the world.[16][17][18]

Racing

In the 1950s and early 1960s, Vespa and Lambretta scooters were raced competitively against motorcycles, often winning the races. In the mid 1960s, motorcycle engines became larger and faster, and a gap was created—along with varying cc classifications. Since the 1980s, Vespa and Lambretta racing has grown into a serious sport in the United States. There are various classes in the United States, depending on the racing association. They are generally:
• Small Frame Class: Open class up to 152 cc's
• Automatics Class
• Specials Class
• Stock Class: Large-frame Vespa and Lambretta 180 & 200 cc scooters.

Vespa models

There have been 138 different versions of the Vespa. Today five series are in production: the classic manual transmission PX and the modern CVT transmission S, LX, GT, and GTS